Open Season Insurance Analyzer

Frequently asked questions

Answers to common questions about loading claims, adjusting them, comparing plans and keeping your information private. Select a question to see its answer.

Getting started

What do I need before I start?

Your health insurance claims for the year, in one or both of these forms:

  • The claims file your insurance company lets you download from its website, as a CSV (comma-separated values) file. It’s usually under Claims or Claims history.
  • The Explanation of Benefits (EOB) statements your plan sends you, as PDF files.

Plan on about 20 minutes. See How it works for an overview.

Link to this answer

Which insurance companies’ files work?

Any carrier that lets you download claims as a CSV file. The analyzer matches common column names and lets you correct any it misses. The EOB Importer reads PDF statements, including scanned ones. Both were built and tested with UnitedHealthcare files, so with other carriers you may need to check a column or a few amounts by hand.

Link to this answer

Can I use a phone or tablet? Which browser should I use?

The analyzer opens on phones and tablets, but loading claim files and reading the comparison table is much easier on a computer. Use an up-to-date version of Chrome, Edge, Firefox or Safari.

Link to this answer

Where do I enter my license key?

Open the Welcome page, choose Enter a license key to start, paste the whole key from your Gumroad receipt, tick the box to accept the Terms of Use, and choose Agree and start. You do this once, on the one computer you’ll use. The first time, the key (never your claims) is checked with Gumroad.

Link to this answer

My license key isn’t accepted. What should I do?
  • Copy the key straight from your Gumroad receipt and paste it, so no characters are missed. It looks like 0A1B2C3D-4E5F6A7B-…: four groups of eight letters and numbers.
  • Make sure no extra words, spaces or line breaks came along with it.
  • If the message says the key is already in use on another computer, email us and we’ll move it to the computer you’re using now.
  • Check your internet connection: the first check on a computer needs to reach our service.

Still stuck? Email support@openseasonanalyzer.com with your order email address. Please don’t send the key itself in a screenshot that others might see.

Link to this answer

Can I use the analyzer on another computer?

Each key works on one computer. Re-entering it on the same computer, for example after removing the license, works. To move it to a new computer, for example after replacing yours, email support@openseasonanalyzer.com and we’ll release it; then enter your key on the new computer’s Welcome page. Please don’t share your key; see the Terms of Use.

Link to this answer

Loading your claims

Where do I find my claims file on my insurance company’s website?

Sign in to your plan’s member website and look under Claims, Claims history or Claims & accounts. Choose the date range you want (usually this plan year), then look for Download or Export and pick CSV. If you only see a PDF or Excel option, see the next questions.

Link to this answer

My files are not uploading properly.

Work through these checks:

  1. Use the right button. In Step 1 on Prepare your claims, choose Select claims CSV file for your insurer’s download, or Read EOB statements (PDF) for PDF statements. Then press Import Claims Files to Review; choosing a file alone doesn’t load it.
  2. Check the file type. The claims file must be a .csv file. If you have an Excel file (.xlsx), open it in Excel or Google Sheets and use Save As or Download → CSV. PDF statements go through the EOB Importer instead.
  3. Confirm the columns. For an insurer download, a panel shows how each column was matched. Fix any that are wrong or show “Not in file”, then press Import claims. At minimum the file needs dates of service and amounts.
  4. Open the file to check it. If it opens empty, or shows only a summary rather than one row per claim, download it again with a different date range or the detailed option.
  5. Reload and try again. Refresh the page, then choose the file again. If you used Clear claims, load the files again afterward.

If it still won’t load, email support@openseasonanalyzer.com with the name of your insurance company and what you see on screen. Please don’t attach the file itself.

Link to this answer

Some columns were matched wrong. How do I fix them?

Usually you don’t need to: after you press Import Claims Files to Review, just press the highlighted Import claims button. To check the matches, open Check the column matches in the panel Review and match your carrier’s columns. It lists each field the analyzer needs with the column it picked. Use the drop-down next to a field to choose the right column, or Not in file if your file doesn’t have it, then press Import claims. It opens by itself if a required column wasn’t found. Amounts that matter most are the allowed amount and what you owed (deductible, copay and coinsurance).

Link to this answer

How do I read my EOB statements (PDFs)?
  1. In Step 1 on Prepare your claims, choose Read EOB statements (PDF). The EOB Importer opens in a new tab.
  2. Choose Choose files (or drag the PDFs in), then Read EOBs. You can load several statements at once.
  3. Review each statement. A green OK means its claim lines add up to the statement’s own totals.
  4. Choose Send claim lines to the analyzer, switch back to the analyzer tab, and press Import Claims Files to Review.

Link to this answer

The EOB Importer didn’t open, or nothing happened when I sent the claim lines.
  • If no new tab opened, your browser may have blocked it. Allow pop-ups for openseasonanalyzer.com and choose Read EOB statements (PDF) again.
  • Send claim lines to the analyzer only works while the analyzer tab that opened the importer is still open. If you closed it, choose Download claim lines CSV in the importer instead, then load that file in the analyzer with Select another EOB Importer CSV file.
  • After sending, remember to press Import Claims Files to Review back in the analyzer.

Link to this answer

A statement shows in red in the EOB Importer. What does that mean?

Red means the claim lines it read don’t add up to the totals printed on that statement, or a field couldn’t be read. Expand the statement to fix the field, or accept it as is if the difference doesn’t matter. You can also remove a statement you don’t want. Scanned statements are read with text recognition, so check their amounts carefully.

Link to this answer

Reading my PDFs is slow, or a PDF won’t open.

Scanned statements take longer, because each page is read as an image. Give it a minute, and load fewer statements at a time if it’s slow. If a PDF is password-protected, open it, then print or save a copy without the password and load that copy.

Link to this answer

Can I combine a CSV download and EOB statements?

Yes. Load both; the same claim in two files is only counted once. This is handy when your CSV is missing some claims, or when family members’ claims come in different forms.

Link to this answer

How are family members handled?

Claims for everyone in the files are loaded together. As they load, names are replaced with labels such as “Person 1” and “Person 2”. Each person’s deductible and out-of-pocket limit are tracked separately where the plan does so. Choose the matching enrollment type (Self Plus One or Self and Family) on the Compare page.

Link to this answer

Reviewing and adjusting claims

How do I adjust a claim line?

In Step 2, Review individual claims, each claim line has two columns you can change:

  • Service type: what the care was. Pick the right one from the list (for example Specialist visit, Lab, or Radiology / imaging). Plans charge each type differently, so this matters most.
  • Network: In if the provider is in your plan’s network, Out if not.

Tick Exclude to leave a claim out of the comparison. When you change a claim’s type, the other claims from that provider update too, and the analyzer remembers it for next time. After changes, create the de-identified file again in Step 3, Create your de-identified claims file so the comparison uses them.

On the Compare page you can also fine-tune the estimate claim by claim; see How do I improve the match?

Link to this answer

What does “type guessed” mean?

Your file didn’t say what kind of care the claim was, so the analyzer guessed from the provider’s name. Choose accept if the guess is right, or pick the correct service type. A large claim marked as a primary care visit, or one where you paid a percentage rather than a flat amount, is often a procedure or specialist visit instead.

Link to this answer

Should I exclude a one-time claim, like a surgery that won’t happen again?

That’s up to you. Including it shows how each plan handles a big year; excluding it shows a more typical year. You can also keep it and use the Claim amounts slider on the Compare page to test lighter and heavier years. Running it both ways is often the most useful.

Link to this answer

What’s the difference between the billed amount, the allowed amount, and what I paid?

The billed amount is the provider’s list price. The allowed amount is the price your plan agreed to pay after its network discount. What you paid is your share of the allowed amount: deductible, copays and coinsurance. Plans are compared using allowed amounts, because each plan splits that price differently between itself and you.

Link to this answer

Can I add care I expect next year?

Yes. Under Expected future care (optional) on Prepare your claims, choose the service type, enter the allowed amount (if you don’t know it, use roughly half the billed price), how many times, who it’s for and the network. Use + Add another row for more items, then Add care.

Link to this answer

Comparing plans

How do I choose which plans to compare?

In Step 3, Choose the plans to compare, first choose the plan year, 2026 or 2027, in the box in the step’s title, and choose your state or U.S. territory so the list shows only nationwide plans and plans offered where you live. Then open Choose plans, search by name or filter by plan type, tick the plans you’re considering, then choose Done. Check which plans are offered where you live. Include your current plan so you can see what switching would save.

Link to this answer

What do FFS, HMO, HDHP and CDHP mean?
  • FFS (fee-for-service): use any provider, with lower costs in network.
  • HMO (health maintenance organization): care from the plan’s own network.
  • HDHP (high-deductible health plan): a higher deductible, with an HSA (Health Savings Account) deposit.
  • CDHP (consumer-driven health plan): comes with a spending account.

Link to this answer

Which enrollment type should I pick?

Self Only covers just you, Self Plus One covers you and one family member, and Self and Family covers you and all eligible family members. Pick the one you’ll enroll in; it sets the premium and which deductible and out-of-pocket limits apply.

Link to this answer

How do I read the results?

In Step 4, Compare what each plan would cost you, each bar is one plan’s year. Dark blue is premiums, amber is what you would pay for care, and the green hatched part is HSA or HRA money the plan gives you, which is subtracted. The dashed marker is the worst case: what you would pay if you reached the plan’s out-of-pocket maximum. The plan with the lowest total is listed first. Plan names link to each plan’s website.

Link to this answer

What does the Claim amounts slider do?

It tests a lighter or heavier year. At 1.00× your claims are used as they are; at 2.00× every claim costs twice as much, and at 0.50× half. A plan that stays cheapest across the range is a safe choice.

Link to this answer

Why should I choose my current plan?

Choosing the plan your claims came from lets the analyzer check its own accuracy against what you actually paid (see How accurate is this estimate?) and show how much you would save by switching.

Link to this answer

Some plans say “premiums only.” What does that mean?

We don’t have verified cost-sharing rules for that plan yet, so its claim costs may be overstated. If it’s your current plan, the analyzer fills in the missing rules from your claims; you can correct them from your plan’s brochure in the inferred rules table.

Link to this answer

Can I save or download my results?

Yes. On the Compare page you can download the selected plans and the claim-by-claim check as CSV files. Your claims themselves are not saved; they’re erased when you close the tab.

Link to this answer

Accuracy and fine-tuning

How accurate is the estimate?

Under How accurate is this estimate?, the analyzer prices your claims under your current plan and compares the result with what your claims show you actually paid. A match within 15% shows in green and means the comparisons can be trusted for claims like yours. Above 15%, it shows a warning and suggests where to look.

Link to this answer

My estimate doesn’t match what I paid. How do I improve the match?
  1. Open Compare this estimate claim by claim. The claims at the top cause most of the difference.
  2. If a claim has the wrong service type or network, fix it in Step 2, Review individual claims, create the de-identified file again, and come back.
  3. If the inferred rules table is showing, compare each rule with your plan’s brochure (its Summary of Benefits near the end), correct any that are wrong, and choose Recalculate. The Difference column shows which rules cause most of the gap.
  4. For a claim that still doesn’t match, tick Adjust rule to remove difference to price it at exactly what your EOB shows, or Adjust all for every claim with a difference.

Link to this answer

What are “inferred rules”?

When our plan data doesn’t have your current plan’s cost-sharing rules, the analyzer works them out from what your claims show you paid, such as a $60 specialist copay or 20% coinsurance after the deductible. Rules from a plan’s brochure are never replaced. You can edit any inferred rule and the deductible, then choose Recalculate; Go back to the inferred rules undoes your edits.

Link to this answer

What does “Adjust rule to remove difference” do?

It prices that claim at exactly what your EOB shows, so its difference becomes zero. It changes your current plan’s cost only; other plans are still priced by their own rules. Adjusted claims count as exact matches in the accuracy percentage, so a perfect match after Adjust all doesn’t by itself mean the other plans’ estimates are more accurate. Fixing service types or entering the brochure’s real rules improves every plan’s estimate.

Link to this answer

What doesn’t the estimate include?

Per-day copays, per-admission caps, visit limits and copay maximums; balance billing by out-of-network providers, separate out-of-network deductibles and out-of-pocket maximums, and network differences between plans; drug tiers beyond generic and preferred brand, specialty pharmacy, mail order and formulary exclusions; Medicare coordination, premium conversion, HSA tax savings, wellness rewards and incentives; prior authorization, referral penalties, and services paid differently by setting. Check each plan’s brochure before you enroll.

Link to this answer

Is this advice about which plan to choose?

No. It’s a planning estimate based on your past claims and the plan rules we could verify. Each plan’s official brochure controls what you would actually pay, and your enrollment decision is yours. We aren’t affiliated with OPM or any carrier and earn nothing from the plan you choose.

Link to this answer

Medicare options for retirees

What do the Medicare options do?

If you’re retired or retiring and you or a family member has Medicare (or will soon), the analyzer can price your care three ways for each plan you choose:

  • Without Part B: Medicare Part A pays first for hospital stays, and the plan pays first for everything else.
  • With Parts A and B: Medicare pays first and the plan pays second. Many FEHB plans then waive their deductible and copays, and some pay back part of your Part B premium.
  • Medicare Advantage through the plan, where the plan offers one.

Each shows the plan premium (retiree rates), Part B premiums with any income-related surcharge, what the plan pays back, what you’d pay for care and the total. To turn it on, tick I’m retired (or retiring) and want to explore Medicare options at the top of Prepare your claims. The Medicare section then appears on the Compare page below Step 4.

Link to this answer

Which Medicare files can I load?

Two kinds, from your Medicare.gov account:

  • Medicare Summary Notices (MSNs) as PDF files. Choose Read Medicare Summary Notices (PDF); the MSN Reader opens in a new tab, like the EOB Importer.
  • The Medicare.gov claims download (a .txt file), or a CSV with Medicare-approved amounts. Choose Select Medicare.gov claims file.

Then choose Import Medicare Claims to Review. The Medicare lines go to Step 2 with your plan claims, and everything in Step 2 goes into the de-identified file. Enter the name on the Medicare claims as it appears on your plan claims, so the same person lines up in both; like every name, it’s replaced with Person 1, Person 2… on your computer. Drug (Part D) claims in a Medicare.gov file are skipped, because drugs are priced from your plan claims. Scanned MSNs can’t be read yet.

If no one has Medicare yet, you don’t need any Medicare files: the analyzer estimates Medicare from your plan claims.

Link to this answer

How does the analyzer estimate costs with Medicare?

For Part B services, Medicare pays 80% of its approved amount after the Part B deductible (preventive care and lab tests in full). For hospital stays, Part A leaves its hospital deductible, counted once per person for the year. The plan, paying second, then charges the lesser of what Medicare left and the plan’s own cost share with Medicare, with its deductible and out-of-pocket limit with Medicare. When Medicare claims are loaded, the amounts Medicare actually left are used.

Each plan’s Medicare rules (waivers, Part B premium paybacks, Medicare Advantage costs and drug limits) come from OPM’s 2027 FEHB Plan Benefits file. Where OPM’s file has no figure, the plan is marked verify and its usual rules are used as the second payer. Open a plan’s Medicare rules to see the figures or change how it pays. Drugs are priced with the plan’s own drug benefit.

On the Compare page, Steps 4 and 5 still price your plan claims only; the Medicare section uses the Medicare claims.

Link to this answer

Are the Part B premiums and income brackets current?

The 2027 Part B premium and deductibles are estimates until CMS announces them, usually in mid-November. The income brackets shown are the 2026 ones; 2027 premiums are based on your 2025 tax return. You can change all of these in the Medicare section, and the comparison updates right away.

Link to this answer

Is this advice on whether to sign up for Part B?

No. It’s a planning estimate for one year of care. Keep in mind that if you don’t sign up for Part B when you’re first eligible and sign up later, Medicare adds a penalty of 10% for each full 12 months you waited, for as long as you have Part B. Without Part B you can’t join a Medicare Advantage plan. Once you’re enrolled in Medicare you can’t put new money in a Health Savings Account. Each plan’s brochure (Section 9) and Medicare.gov control.

Link to this answer

Privacy and your data

Do my claims leave my computer?

No. Your claims are read and de-identified in your browser, and the pages that read them are blocked from sending anything over the internet. Only the de-identified file, holding service types, networks, dates and dollar amounts with no names, member IDs, claim numbers, provider names, codes or account numbers, is sent over an encrypted connection to our comparison service, which prices it and keeps nothing. See the Privacy Policy.

Link to this answer

Can I see exactly what is sent?

Yes. In Step 3, Create your de-identified claims file, view the de-identified file before you continue, and download it if you’d like to keep a copy.

Link to this answer

Are my claims or settings saved?

Claims are erased when you close the browser tab. If you tick Remember my plan choices and settings on this computer, your plan choices and settings (never your claims) are saved in your browser on that computer. On Prepare your claims, Clear the form erases everything. On Compare plans, it resets Step 3 onward (plan year, state, chosen plans and settings) and keeps your claims.

Link to this answer

Does the website use cookies or tracking?

No. There are no cookies, ads, analytics or tracking scripts on the website or in the analyzer.

Link to this answer

Buying and support

What does it cost?

The FEHB Plan Analyzer pass is $29.99. One pass compares both 2026 and 2027 plans; see Purchase. You pay once and can use the analyzer as often as you like through Open Season. Have a discount code? Enter it on the checkout page.

Link to this answer

When will I get my license key?

Right away. Your license key appears on the Gumroad receipt page after you pay and in your Gumroad receipt email. Check your spam folder for the receipt. If it hasn’t arrived, email support@openseasonanalyzer.com with the email address you used at checkout, and we’ll resend it.

Link to this answer

Who handles payment?

Checkout is handled by Gumroad, our reseller, which also handles sales tax. We never see your card number.

Link to this answer

What will the charge look like on my card statement?

Because Gumroad, our reseller, processes the payment, the charge appears on your card statement under Gumroad’s name (it usually begins with GUM). Your receipt email from Gumroad lists the purchase as the FEHB Plan Analyzer from Open Season Insurance Analyzer.

If you don’t recognize a charge, check for that receipt email first. Still unsure? Email support@openseasonanalyzer.com with the date and amount, and we’ll help.

Link to this answer

How do I get help?

Email support@openseasonanalyzer.com. Describe the problem and what you see on screen, or send a screenshot with names hidden. Please don’t attach your claims or EOB statements.

Link to this answer

Didn’t find your answer? Email support@openseasonanalyzer.com. Please describe what you see, and don’t attach claims or statements.

Copyright © 2026 RhumbLine Endeavors, L.L.C. All rights reserved. · Privacy Policy · Terms of Use